Search
Filters
Close
DeMello off-Road's Aluminum bumpers are second to none in strength and durability while keeping it a light weight design.
Manufacturer: DEMELLO OFF-ROAD

Texture finish powder coating tuxedo black.

Fully sand blasted and powder coated and 

baked on. Powder coating is a good thick coat

alternative to spray paint that gets into all the small 

places paint can not.  

Powder coating offers no warranty against 

scratching, chipping, fadding, rust, alien attacks 

or chuck norris. 

Squadron-R Sport, Pair Driving/ Combo LED

Includes:

  • x2 Squadron-R Sport LED Light
  • Mounting Bracket
  • Wiring Harness

Smittybilt X2O 10K Waterproof Synthetic Rope

10000lb Wireless Winch Gen2 with Fairlead -

98510

Flat rates for shipping to the lower 48

Please contact us if you have any quesitons.

About Shipment Insurance through UPS Capital Insurance Agency

  • Insure most shipments valued up to $100,000 without prior approval
  • $0 deductible for many commodities. To see a list of commodities with deductibles or other restrictions, see the UPS Capital Insurance Customer Reference Guide
  • Expedited insurance claims for shipments value up to $5000
  • Covered losses are valued at the amount of invoice value, and the cost of freight. Plus, for new goods, up to 10% of the insured value
  • In the event a shipment contains multiple commodities, the highest deductible and insuring conditions of the shipped commodities will apply
  • For more information about UPS Capital shipment insurance see the UPS Capital Insurance Customer Reference Guide

Differences Between Carrier Liability and Shipment Insurance

Carrier Liability

A regulated Motor Carrier operating in interstate commerce (most interstate trucking companies) is liable to Shipper (their customers) for loss, damage or delay under a federal law called the Carmack Amendment to the Interstate Commerce Act. Since 1935, the Carmack Amendment has provided a uniform, national standard to limit the liability of Motor Carriers for loss, damage or delay to freight shipments. However, the Carmack Amendment does not impose liability on Motor Carriers for shipments for a wide variety of reasons. For example, if the Shipper waives liability in the bill of lading above a specified value, the claim is limited to the declared value. Another example is that a Motor Carrier is not liable for intrastate shipments. In addition, to obtain payment for a claim under the Carmack Amendment, a Shipper must prove numerous facts, including the following: (1) delivery of freight to the Motor Carrier in good condition; (2) delivery to the person named in the bill of lading for freight that is short, damaged or unreasonably late; and (3) the amount of actual loss or injury to the freight. Under the Carmack Amendment, there are multiple other reasons that the Motor Carrier does not have to pay claims by Shippers, including proof by the Motor Carrier that it was not negligent or that the loss was due solely to an act of the Shipper.

Shipment Insurance

Shipment insurance pays for loss, damage or delay different from the coverage provided by the Carmack Amendment. For example, a claim by a Shipper for freight loss, damage or delay may be covered by shipment insurance, regardless of whether the shipment was intrastate. Similarly, shipment insurance may cover loss, damage or delay without regard to whether the Motor Carrier was negligent or the claim was due to the negligence of the Shipper. The only way to know whether particular freight loss, damage and delay are covered by shipment insurance is to read the policy.

Includes removing factory bumper

and installation of DeMello off-road bumper

does not include winch or light installation

Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$2,100.00

DeMello off-road FJ CRUISER Aluminum bumper:

DeMello off-road winch bumpers are manufactured and engineered in the USA, in Corona California. We take pride in the quality and craftsmanship of our bumpers. We have been building bumpers for 20 years for Toyota trucks and SUV's we use what we have learned on the trail with countless hours of testing and apply it to every product we make.

The FJ CRUISER bumpers are built for strength and clearance while keeping the weight down and improving approach angle. DeMello off-road bumpers have been engineered and improved upon for over 20 years to give you the strongest and leanest bumper possible without excessive weight or overhang on the front end of your Toyota truck or SUV. We’ve engineered our bumpers removing material where it’s not needed and added it where it is needed to keep the performance you’ve come to expect from your Toyota.

We have taken years of experience and dedication to Toyota trucks and SUV’s to build the best bumpers possible with the highest quality possible. Our bumpers are fully MiG welded and key slotted together for the best in strength and durability. Our one-piece shackle design that directly ties into the winch plate and bolts to the frame is the strongest design in the industry.

Specs:

  • 1in one-piece shackle design
  • 1/4in one-piece winch plate designed pushed back the winch and keep your overhang weight minimal
  • 3/16in internal Skelton design
  • 3/16in skin to keep bumper light as possible and weight pushed back
  • Standard winch mount for 8000-10000lb winch (note winch solenoids will need remounted)
  • Weight 45-60lbs depending on options

Options:

  • Powder coating-texture finish
  • Winches
  • Baja design LED lights
  • Winch solenoid brackets
  • Shipping insurance
  • Installation

Please Note:

  • Bumpers come bare-metal and will need to be coated or painted before installation. (Optional powder coating)
  • Powder coating holds no warranty to rust, chipping or fading. no shipping damages are covered unless insured.
  • lead times for bumpers can range from 1-20 weeks lead time (20% restocking fee if order canceled)
  • Bumpers hold no warranty for misuse or poor judgment, they are intended to aid you on the trail not completely replace common sense or judgement.

DeMello off-road FJ CRUISER Aluminum bumper:

DeMello off-road winch bumpers are manufactured and engineered in the USA, in Corona California. We take pride in the quality and craftsmanship of our bumpers. We have been building bumpers for 20 years for Toyota trucks and SUV's we use what we have learned on the trail with countless hours of testing and apply it to every product we make.

The FJ CRUISER bumpers are built for strength and clearance while keeping the weight down and improving approach angle. DeMello off-road bumpers have been engineered and improved upon for over 20 years to give you the strongest and leanest bumper possible without excessive weight or overhang on the front end of your Toyota truck or SUV. We’ve engineered our bumpers removing material where it’s not needed and added it where it is needed to keep the performance you’ve come to expect from your Toyota.

We have taken years of experience and dedication to Toyota trucks and SUV’s to build the best bumpers possible with the highest quality possible. Our bumpers are fully MiG welded and key slotted together for the best in strength and durability. Our one-piece shackle design that directly ties into the winch plate and bolts to the frame is the strongest design in the industry.

Specs:

  • 1in one-piece shackle design
  • 1/4in one-piece winch plate designed pushed back the winch and keep your overhang weight minimal
  • 3/16in internal Skelton design
  • 3/16in skin to keep bumper light as possible and weight pushed back
  • Standard winch mount for 8000-10000lb winch (note winch solenoids will need remounted)
  • Weight 45-60lbs depending on options

Options:

  • Powder coating-texture finish
  • Winches
  • Baja design LED lights
  • Winch solenoid brackets
  • Shipping insurance
  • Installation

Please Note:

  • Bumpers come bare-metal and will need to be coated or painted before installation. (Optional powder coating)
  • Powder coating holds no warranty to rust, chipping or fading. no shipping damages are covered unless insured.
  • lead times for bumpers can range from 1-20 weeks lead time (20% restocking fee if order canceled)
  • Bumpers hold no warranty for misuse or poor judgment, they are intended to aid you on the trail not completely replace common sense or judgement.

Products specifications
Screensize13.0''