Rear bumper discription:
The DeMello Off-Road rear FJ bumper is designed with high clearance and strength in mind. The rear bumper is formed from 3/16in steel with a 1/4in thick mounting plates and 1/2in thick recovery points, to ensure it's strength against heavy trail use. This bumper has an option for powder coating with a texture finish powder coating.
The 3 piece design makes fitting the bumper up to the FJ a perfect fit every time. The three piece design also allows you to re-adjust the bumper if it takes a good hit on the trail and knocks it out of alignment.
You can use your factory back up sensors in this bumper (minor modifications necessary) and add additional back up lights to the outer wings to help assist you with back up at night. The flat top of the bumper in the center and outer edges gives you a extra place to stand when getting to your roof rack or simple good flat surface to rest on with the back door open.
- Bumper weight varies on options and if it's loaded or not loaded. For optium perfromance we recommend Icon's overlanding springs PN 52800
- 3/16in construction on main bumper.
- 1/4in mounting plates and mounting points.
- 1/2in shackles.
- Rear 4in back up light holes
- license plate re-location mount
- Locking latch and lock out 90* swing out pin.
- This rear bumper does not work with your factory hitch, we do sell a hitch that works with our bumper but it is not government licensed for towing. It is for off road use only officially.
- This rear bumper requires cutting your factory plastic bumper and minor modifications to use your factory back up sensors.
- We recommend running a small weld on the bumper brackets to the frame with the swing out if you do a lot of high speed off roading where the bumper will see more abuse. Or if you want to reduce the movement.
Swing out Gate:
Our new swing out gate is designed to be DeMello Tough. With multiple options of mounting gears for your offroad adventure as well as your spare tire. We use only the best products on our rear bumpers with a lock out designed latch system along with a 1.75in hinge. The swing out lock is not a bump stop and the gate should never be allowed to swing freely open or driven while in lock out position.
- 1.75in bearing serviecable hinge
- lockout latch system.
- up to a 35in tall tire
- Factory rear sensor ready
- two rear jerry can style gas can holders
- rear factory camera mount and wiring to extend factory harness (requires some cutting)
- rear reciever hitch
Things to note while ordering:
- Not everything is included in the pictures.
- Gas cans are not included
- FJC is not included in pictures
- Rear lights are not included in pictures
- Back ground of tree's misc parking structures or landscape are not included in the bumper order.
- Please call and ask about any quetions you may have about the rear bumper and confirm your order before placing it.
Please note* bumper may not be 100% like the pictures, we have made slight improvements and refinements to the bumper over time to make it more universal to everyones needs. If you have specific needs or request please e-mail [email protected] before ordering. Also note, things like the FJ in the picture, the air chuck the gas cans are not inclulded. If you have specific request please contact us before placing your order.